A Virtual Private Network (VPN)
is a network that uses the internet to provide remote access to a
centralized organizational network. VPN is very useful these days as it
allows one to access data, files, printers and other devices remotely.
Users need to be authenticated first, to be able to connect a VPN. It is
not a cloud service, but a file sharing service that requires the
internet and a server to be hosted.
2. Click on “Change adapter settings”.
3. Press Alt + F and click on “New Incoming Connection”
4. Now a wizard will open. In the first step, mark those users whom do you want to allow access to use your connection.
5. Put a mark on “Through the internet” and click Next.
6. Now select the protocols you want to connect, and double click on “Internet Protocol Version 4 (TCP/IPv4).
6. In this screen which appears, ensure that the Properties set are the same as shown in the image below. Click OK.
7. Now you will see the last step of the Wizard. Click on Close to finish it – but remember to note down the computer’s name as it will be used when you connect.
That’s all! You will have set up your own VPN connection. Now let’s see how to configure the Windows Firewall.
2. Click on “Advanced Settings” in the left menu.
3. Now click on “Inbound Rules”. Next click on the “Actions” menu and then click on “New Rule…”
4. A Wizard will open. In the first step, select the “Port” option and click on Next.
5. Select “TCP”. In the “Specific remote ports” space, enter “1723” and click on Next.
6. Now select “Allow the connection” and click Next, again.
7. Apply the rule to everyone.
8. In the Name and Description fields, enter anything you want and click on “Finish”
Now you will have also configured your Windows Firewall to accept connections. But you will also need to configure the Router. I can’t explain all the Router settings, as they differ from Router to Router, but I can help you out by just giving you some advice – and that is to Enable PPTP and Generic Route Encapsulation (GRE) on the Router, or enable PPTP, or create a port forward to port 1723. If your Router has an additional setting for PPTP or VPN, make sure it’s enabled. After doing this, your computer will be ready to receive the VPN connection.
Configure VPN connection
This tutorial will show you how to configure your Windows 10/8/7 computer to accept VPN connections.Set up a new connection
1. Open Control Panel > Network and Sharing Center.2. Click on “Change adapter settings”.
3. Press Alt + F and click on “New Incoming Connection”
4. Now a wizard will open. In the first step, mark those users whom do you want to allow access to use your connection.
5. Put a mark on “Through the internet” and click Next.
6. Now select the protocols you want to connect, and double click on “Internet Protocol Version 4 (TCP/IPv4).
6. In this screen which appears, ensure that the Properties set are the same as shown in the image below. Click OK.
7. Now you will see the last step of the Wizard. Click on Close to finish it – but remember to note down the computer’s name as it will be used when you connect.
That’s all! You will have set up your own VPN connection. Now let’s see how to configure the Windows Firewall.
Configure Firewall to accept connections
1. Go to Control Panel > Windows Firewall.2. Click on “Advanced Settings” in the left menu.
3. Now click on “Inbound Rules”. Next click on the “Actions” menu and then click on “New Rule…”
4. A Wizard will open. In the first step, select the “Port” option and click on Next.
5. Select “TCP”. In the “Specific remote ports” space, enter “1723” and click on Next.
6. Now select “Allow the connection” and click Next, again.
7. Apply the rule to everyone.
8. In the Name and Description fields, enter anything you want and click on “Finish”
Now you will have also configured your Windows Firewall to accept connections. But you will also need to configure the Router. I can’t explain all the Router settings, as they differ from Router to Router, but I can help you out by just giving you some advice – and that is to Enable PPTP and Generic Route Encapsulation (GRE) on the Router, or enable PPTP, or create a port forward to port 1723. If your Router has an additional setting for PPTP or VPN, make sure it’s enabled. After doing this, your computer will be ready to receive the VPN connection.
To Any Queries Send the Mail Click here..
BY